PRODUCTS - NOZZLES AND SINGLE NOZZLES STANDARD |
| Click |  |
in order to visualize the page of the new products | Nozzles and Single Nozzles Standard - Special Nozzles |
| Select required nozzle type and diameter to open related PDF file, then click the codes enhanced in red to download the 2D and 3D drawings. | |||
|
If the required drawings are not available, please contact our Technical Department
|
|||
|
INFORMATIVE CHARTS | |
|
NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds F11 Single nozzle F6/1-11 In restricted areas or small parts injection and in applications where it is required to have the gate feed on an "inside" surface of the part (example caps), it is necessary to use small diameters and very long nozzles. |
|
|||||||||
|
NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds F1, FM-1 Single nozzle FLH6-1 This new nozzle type is provided with an interchangeable tip, could be supplied for not stiffened materials or for materials filled with abrasive fibers. This nozzle type is suitable for moulding parts where the injection point is reduced and for plastic materials which leave threads at the mould opening.The type with the exit of the heater in the middle of the nozzle allows for heater replacement whilst the mould is assembled on the injection device. |
|
|||||||||
|
NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds DN1 Single nozzle DN61 This nozzle type is suitable for moulding parts where the injection point is reduced and for plastic materials which have the tendency to string or drool at the mould opening. |
|
|||||||||
|
Nozzles for material with metallic particles for direct injection in multicavity moulds FGLT-A1, FGLT-M1 Single nozzle FLH6/GLT The new generation NOZZLES have been designed for moulding of materials with metallic particles and they are therefore suitable to mould parts where aesthetics are very important. The particular tip shape allows uniform material distribution, therefore the flow paths are eliminated. The range of application sectors for these nozzle types are to be found in cosmetics, household, packaging, where the aesthetics of the moulded part is essential. |
|
|||||||||
|
NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds F1D Single nozzle FLH6-1D This nozzle type is provided with a tip which shuts off on the cavity and it is mostly used for moulding parts that require a reduced injection point. |
|
|||||||||
|
Special nozzles for small parts with extended tip for direct injection in multicavity moulds F11-1B Single nozzle F6 11-1B This nozzles have small diameters but with very long tip to be used in restricted areas and for internal injection of small parts. The particular tip shape with extra long profile allows the gate feed on an “inside” surface of the part. The application sectors of this nozzle type are especially the packaging, medical, cosmetic and miniaturized components. Different lengths are available starting from 36 mm up to 146 mm. The minimum pitch in hot runner systems applications is 13 mm. |
|
|||||||||
|
Special nozzles for small parts with extra long tip for direct injection in multicavity moulds F11-1C Single nozzle F6 11-1C This nozzle type has the same characteristics as the F11_1B type. In addition it allows the injection of small parts on the inside surface at a considerable depth. |
|
|||||||||
|
EXTENDED TIP NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds F1B, FM-1B Single nozzle FLH6-1B The extended profile nozzle is utilized in applications where it is desirable to have the gate feed on an "inside" surface of the part, or where fast cycles are needed. This nozzle has the same characteristics as the F1 nozzle. The type with the exit of the heater in the middle of the nozzle allows for heater replacement whilst the mould is assembled on the injection device. |
|
|||||||||
|
EXTENDED TIP NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds DN1B Single nozzle DN61B The extended tip types are the most frequently used for internal injection in critical points, such as elongated caps and containers, or where it is necessary to keep the heated part of the nozzle as far away as possible from the part surface, to avoid marks and unsightly appearance. |
|
|||||||||
|
NOZZLE FOR INJECTION ON SPRUE Nozzle for multicavity moulds F2 Single nozzle FLH6-2 Suitable for injection on sprues or for thick wall parts (over 4 mm), where the injection point aesthetics is not important. The injection point on the part will be visible and it will depend on the injection hole diameter. |
|
|||||||||
|
NOZZLE FOR INJECTION ON SPRUE Nozzle for multicavity moulds F2P Single nozzle FLH6-2P Suitable for injection on sprues or for thick wall parts (over 4 mm), where the injection point aesthetics is not important. The injection point on the part will be visible and its dimension will depend on the injection hole diameter.This nozzle type is suggested for plastic materials which leave threads at the mould opening. This nozzle leave an injection point similar to the free flow nozzles, while guarantees the injection point control at restart of the moulding cycle.It's suggested for injection on sprue of technical and critical moulding material (PA66 30%FV , PBT , PEEK etc.) |
|
|||||||||
|
NOZZLE FOR INJECTION ON SPRUE Nozzle for multicavity moulds DN2 Single nozzle DN62 The open profile nozzle is used for injection on sprue or to mould parts where the injection point aesthetics is not critical. |
|
|||||||||
|
NOZZLE FOR INJECTION ON SPRUE Nozzle for multicavity moulds F2D-S Single nozzle FLH6-2D-S This type of nozzle with the tip which shuts off on the cavity, is used particularly when colour changing must be easily achieved. The injection point leaves a small boss on the moulded part. |
|
|||||||||
|
NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds F2D-N Single nozzle FLH6-2D-N This style of nozzle with the tip which shuts off on the cavity, is used particularly when colour changing must be easily achieved. The injection point leaves a small boss on the moulded part. This type of nozzle is used to mould parts where a injection point aesthetics is not critical. |
|
|||||||||
|
Nozzle for injection on sprue in multicavity moulds F2D-SLA Single nozzle FLH6/2D-SLA This type of nozzle with the tip which shuts off on the cavity, is used particularly when colour changing must be easily achieved. The injection point leaves a small circular boss on the moulded part. The tip of this nozzle type has been reinforced in order to obtain a bigger sprue and therefore it is indicated to mould parts of large dimensions. |
|
|||||||||
|
Nozzle for injection on sprue in multicavity moulds F2D-SLU Single nozzle FLH6/2D-SLU This type of nozzle is similar to the F2D-S-LA with the difference that the tip is prolonged to suit to the different shapes of the mould cavities. |
|
|||||||||
|
NOZZLE FOR USE WITH VALVE GATE Nozzle for multicavity moulds F3, FM-3 Single nozzle F6/3 This type of nozzle is used with either pneumatic or hydraulic shut off valves, to mould parts where aesthetics are important and thick wall parts where the injection point must be flat and not much visible. The type with the exit of the heater in the middle of the nozzle allows for heater replacement whilst the mould is assembled on the injection device. |
|
|||||||||
|
EXTENDED TIP NOZZLE FOR USE WITH VALVE GATE Nozzle for multicavity moulds DN3 This type of nozzle is used with either pneumatic or hydraulic shut off valves, to mould parts where the injection point must be aesthetic and minimized. |
|
|||||||||
|
NOZZLE FOR USE WITH VALVE GATE Nozzle for multicavity moulds F3D Single nozzle F6/3D This type of nozzle is used with either pneumatic or hydraulic shut off valves, with a tip which shuts off on the cavity, as result the pin closure area (injection point) is not a constraint. It is used to mould parts where aesthetics are important and thick wall parts where the injection point must be flat and not much visible. |
|
|||||||||
|
EXTENDED TIP NOZZLE FOR USE WITH VALVE GATE Nozzle for multicavity moulds DN3B The new concept of type 3B is particularly interesting, with lengthened gate system tip, suitable for the injection of parts where appearance is important, and for sequential checking. It is possible to obtain optimal regulation of the plastic material flow in special applications such astubs and thin-walled containers, that cannot be injected externally due to the presence of the label. Furthermore, the gate system nozzles leave a very clean injection point, that besides being almost unseen, is free of imperfections and residual material that could pollute the product contained in the tub. It is therefore most appropriate for applications in the foodstuffs packaging sector. The needle centring system on gate system types 3B has been perfected, the needle centres itself in the tip of the nozzle ensuring perfect concentricitywith the mould seat where the needle closes. |
|
|||||||||
|
MULTIPOINT NOZZLE FOR DIRECT INJECTION Nozzle for multicavity moulds KS5 Single nozzle KS6/5 The multipoint nozzle is used for the moulding of small precision parts, where the distance between the cavity axes is short, to allow small mould systems. This type of nozzle is also suitable to mould parts where concentricity is aided by feeding the component through multiple gates. |
|
|||||||||
|
MULTIPOINT NOZZLE FOR EDGE GATE INJECTION Nozzle for multicavity moulds KS8 Single nozzle KS6/8 The nozzles for edge gate injection are used to inject into multiple cavities and also allow a smaller mould size. In certain applications, if the inside diameter of a round part is aplicable to our nozzle, this nozzle can be used to inject the part internally in order to archive good concentricity. |
|
| THERMOPLAY S.p.A. - Via Carlo Viola, 74 - 11026 - Pont Saint Martin (AO) Italy tel. +39 0125 800311 r.a. fax +39 0125 806271 - 805567 Cap Soc. 500.000 euro i.v. - P.I. 00602900078 - C.C.I.A.A. 52213 Trib. AO 7941/45 - Registro A.E.E. : IT08020000002586 |
|
|
