NOZZLE F1 TYPE Catalog download Multicavity nozzle SINGLE nozzle Single nozzle and NozzleYOU MUST FILL IN THE FIELD NOZZLE DIAMETERNozzle diameter: Select: nascosto Diameter of the nozzle seat 2D/3D drawings download - Nozzle YOU MUST FILL IN THE FIELD HEATER YOU MUST FILL IN THE FIELD LENGTH Heater wire exit: Select: Heater wire exit can be on the top or in the middle of the nozzle. Heater wire exit in the middle allows the replacement of heater whilst the mould is assembled on the injection device. Nozzle length: Select: Distance in the mould between the lower surface of the nozzle head and the injection gate. The gate is at the end of the nozzle and the beginning of the moulded piece. YOU MUST FILL IN THE FIELD TIP TYPE Select tip type: Select: 2D/3D drawings download - Bushing YOU MUST FILL IN THE FIELD TYPE BUSHING Type Bushing: Select: Conditioned Not conditioned Nozzle bushing can be normal or conditioned. YOU MUST FILL IN THE FIELD BUSHING LENGTH Bushing Length: Select Conditioned bushing are without spacers and they are provided in 2 standard lenghts. YOU MUST FILL IN THE FIELD SPACER HEIGHT Spacer Height: Select Spacers can be used when it is required to have a bushing longer than the standard ones. Spacers cannot be used with conditioned bushings.