Slider

Hydraulic operation

P/N E18500

F3 Ø 11
Pin stroke 5mm
Ø pin 2.5 mm
Ø bore piston 20 mm

DN3 Ø 18, 22 - FN3T/3BT/3D/3DSLA/3DSLU Ø 16, 24
Pin stroke 10 mm
Ø pin 2.5 mm
Ø bore piston 20 mm

Valve gate cylinders with bore Ø 20 mm, can only be hydraulically operated.
The cylinder is housed in a mould plate 42.5 mm thick, with a bore of Ø 25 mm for each cylinder.
A back plate is needed with an air channel to operate the cylinder – full details in the catalogue.
Stroke cannot be modified.
Pin cannot be oriented.

Hydraulic and pneumatic operation

P/N E19399

F3 Ø 11
Pin stroke 5mm
Ø pin 2.5 mm
Ø bore piston 32 mm

DN3 Ø 18, 22 - FN3T/3BT/3D/3DSLA/3DSLU Ø 16, 24
Pin stroke 10 mm ±0.75 mm
Ø pin 2.5 mm
Ø bore piston 32 mm

DN3 Ø 30 - FN3T/3BT/3D/3DSLA/3DSLU Ø 32
Pin stroke 10 mm ±0.75 mm
Ø pin 3.3 mm
Ø bore piston 32 mm

Valve gate cylinder with bore Ø 32 mm, can be actuated both hydraulically or pneumatically
The cylinder is housed in a 46 mm thick back plate of the mould, with a bore of Ø 39 mm for each cylinde.r
The valve gate pin can be adjusted in 0.05 mm increments by ±0.75 mm. Adjustment is achieved by a simple adjustment screw located in the back of the cylinder and accessed without removing the mould for the injection moulding machine (depending on the mould design).
Pin can be oriented.(as an option).

P/N E18327

DN3 Ø 44 - FN3/3B/3D/3DSLA/3DSLU Ø 46

Pin stroke 16 mm ±0.75 mm
Ø pin 5.8 mm
Ø bore piston 60 mm

Valve gate cylinder with bore Ø 60 mm can be actuated hydraulically or pneumatically.
The cylinder is housed in a 66 mm thick back plate of the mould, with a bore of Ø 77 mm for each cylinder.
The valve gate pin can be adjusted in 0.05 mm increments by ±0.75mm. Adjustment is achieved by a simple adjustment screw located in the back of the cylinder and accessed without removing the mould for the injection moulding machine (depending on the mould design).
Pin can be oriented.(as an option).

Pneumatic operation

P/N E18326

F3 Ø 11
Pin stroke 5mm
Ø pin 2.5 mm
Ø bore piston 32 mm

DN3 Ø 18, 22 - FN3T/3BT/3D/3DSLA/3DSLU Ø 16, 24
Pin stroke MIN 10 mm - MAX 10.5 mm
Ø pin 2.5 mm
Ø bore piston 32 mm

DN3 Ø 30 - FN3T/3BT/3D/3DSLA/3DSLU Ø 32
Pin stroke MIN 10 mm - MAX 10.5 mm
Ø pin 3.3 mm
Ø bore piston 32 mm

Valve gate cylinder with bore Ø 32 mm, can be actuated pneumatically.
The cylinder is housed in with the manifold mould plate.
A back plate is needed with an air channels to operate the cylinder – full details in the catalogue.
Pin cannot be oriented.

P/N E18329

DN3 Ø 44 - FN3/3B/3D/3DSLA/3DSLU Ø 46

Pin stroke MIN 16 mm - MAX 17 mm
Ø pin 5.8 mm
Ø bore piston 40 mm

Valve gate cylinder with bore Ø 40 mm, can be actuated pneumatically.
The cylinder is housed in the manifold mould plate.
A back plate is needed with an air channels to operate the cylinder – full details in the catalogue.
Reducing the thickness of the adjustment washer, the pin stroke can be increased by 0.5 mm.
Pin cannot be oriented.

This site uses cookies. By continuing to use this site, you agree to the use of cookies. For more information on how we use cookies, please view our Cookies Notice.