TD-1B35 TYP TD-1B TYP TD/TD6-1B: Nozzle suitable for moulding parts where good injection point appearance is required. Fitted with extended tip of 3,5 mm to be housed in areas where the space is limited. Suitable for moulding thin parts that require fast cycles. Moreover, the heating area is distant from the surface of the piece to limit haloing and imperfections on the moulded piece. The nozzle is suitable for moulding materials with abrasive fillers but not to perform quick colour changes. For materials with very high fluidity only. If compared with TF series nozzles, TD nozzles have the sealing area on the external body rather than the tip and requires less accurate machining of the seat. Katalog Mehrfachdüse Einzeldüse SIE MÜSSEN DEN DURCHMESSER DER DÜSE AUSWÄHLEN Durchmesser der düse: Durchmesser der Befestigung. Wählen: nascosto 2D/3D Abbildungen herunterladen - Düse SIE MÜSSEN DEN KABELABGANG AUSWÄHLEN SIE MÜSSEN DIE DÜSENLÄNGE AUSWÄHLEN Kabelabgang: Der Kabelabgang kann sich sowohl oben als auch in der Mitte der Düse befinden. Befindet sich der Kabelabgang in der Mitte, kann der Heizer bei demontierter Kavitätenplatte demontiert werden. Wählen: Länge der düse: Abstand im Formkörper zwischen Unterseite des Düsenkopfes und der Einspritzöffnung. Die Einspritzöffnung ist am Ende der Düse und am Anfang des Formstücks. Wählen: