TYPE TF/FN-1 TF/TF6-1 ~ FN/FNH6-1T ~ FN/FNH6-1MDT ~ FT/FTH6-1MD TYPE FN/FNH6-1T: Nozzle suitable for moulding parts where good injection point vestige is required. It is suggested only if the injected material is EPDM, HDPE, LDPE, LLDPE, PP, PS. is not suitable for moulding materials with abrasive charges.TYPE FN/FNH6-1MDT: Nozzle suitable for moulding parts where good injection point appearance is required. Unlike the FN-1T nozzle, it is suitable for moulding materials as EPDM, HDPE, LDPE, LLDPE, PP, PS with abrasive fillers. TYPE FT/FTH6-1MD ~ TF/TF6-1: Nozzle suitable for moulding parts where good injection point appearance is required. Unlike the FN-1MDT nozzle, is recommended for all other polymers also with abrasive fillers. Catalogue Multicavity nozzle Single nozzle YOU MUST FILL IN THE FIELD NOZZLE DIAMETER Nozzle diameter: Diameter of the nozzle seat Select: nascosto 2D/3D drawings download - Nozzle YOU MUST FILL IN THE FIELD HEATER YOU MUST FILL IN THE FIELD LENGTH Heater wire exit: Heater wire exit can be on the top or in the middle of the nozzle. Heater wire exit in the middle allows the replacement of heater whilst the mould is assembled on the injection device. Select: Heater wire exit can be on the top or in the middle of the nozzle. Heater wire exit in the middle allows the replacement of heater whilst the mould is assembled on the injection device. Nozzle length: Distance in the mould between the lower surface of the nozzle head and the injection gate. The gate is at the end of the nozzle and the beginning of the moulded piece. Select: YOU MUST FILL IN THE FIELD TIP TYPE Select tip type: Select: 2D/3D drawings download - Bushing YOU MUST FILL IN THE FIELD TYPE BUSHING Type Bushing: Nozzle bushing can be normal or conditioned. Select: Conditioned Not conditioned YOU MUST FILL IN THE FIELD BUSHING LENGTH Bushing Length: Conditioned bushing are without spacers and they are provided in 2 standard lenghts. Select YOU MUST FILL IN THE FIELD SPACER HEIGHT Spacer Height: Spacers can be used when it is required to have a bushing longer than the standard ones. Spacers cannot be used with conditioned bushings. Select